Cost by roof size
| Roof size | Typical installed range |
|---|---|
| 800 sq ft | $2,400–$8,800 |
| 1,000 sq ft | $3,000–$11,000 |
| 1,500 sq ft | $4,500–$16,500 |
| 2,000 sq ft | $6,000–$22,000 |
| 3,000 sq ft | $9,000–$33,000 |
Cost by membrane
| Membrane | Installed per sq ft |
|---|---|
| Rolled asphalt | $2.00–$5.00 |
| Built-up / tar & gravel | $3.50–$7.50 |
| EPDM | $3.50–$10.00 |
| TPO | $4.00–$10.00 |
| Modified bitumen | $4.00–$7.50 |
| PVC | $5.00–$12.00 |
| Spray foam | $3.50–$7.00 |
| Metal | $5.00–$16.00 |
Extras that change the total
- Tear-off and disposal: $1–$2 per sq ft
- Insulation boards (polyiso): $0.50–$3.00 per sq ft installed
- Roof drains: $70–$340 each (part)
- Permits: $150–$500 in many areas
- Deck replacement where rot is found
- Edge metal, coping and parapet work
- Crane or lift access on taller buildings
Garage and porch roofs
One-car garage: about $850–$3,100. Two-car: $1,200–$4,400. Three-car: $2,500–$9,200.
Ways to save without cutting corners
- If the existing roof is dry and code allows, ask for a recover price as well as a tear-off price.
- Schedule outside peak storm season where possible.
- Bundle drains and flashing upgrades into the replacement rather than doing them later.
- Ask about cool-roof options if you're in a hot climate; lower cooling bills are part of the return.
About our numbers: price ranges on this site are national planning figures drawn from published 2025–2026 cost guides (mainly HomeGuide) and trade sources, rounded for readability. They are illustrative, not quotes. Local labor rates, access, roof height, insulation condition and permit rules can move a real price well outside them.



