Flat and low-slope roofs fail in predictable places: seams, flashings, penetrations, drains and anywhere water sits. The right repair depends on two things, the membrane you have and the condition of the insulation underneath. Start here.
Repairs by roof type
| Roof type | How to recognize it | How it's repaired |
|---|---|---|
| TPO | White or light gray single-ply sheet, seams look "melted" together | Hot-air welded patch or seam re-weld, then probe test |
| EPDM | Black (sometimes white) rubber, seams taped or glued, feels like an inner tube | Cleaned, primed, tape-backed cover patch with rounded corners |
| PVC | White single-ply, often on restaurants and buildings with grease or chemical exposure | Hot-air welded PVC patch |
| Modified bitumen | Rolled asphalt sheets with a granule surface, overlapped seams | Cut-out and patch with compatible ply, cold-applied or self-adhered; torch only where safe |
| Built-up (BUR) | Gravel or a smooth coated surface over several layers of felt and asphalt | Remove gravel, cut out damage, rebuild plies, re-flood and re-gravel |
| Spray foam (SPF) | Seamless, slightly textured foam with an elastomeric coating | Cut out damaged foam, refill with sealant or foam, recoat |
Repairs by problem
Active leaks
Leak tracing, temporary dry-in and permanent repair.
Storm & emergency damage
Wind blow-offs, punctures, fallen limbs and hail.
Flashing & penetrations
Parapets, curbs, pipe boots, skylights and edge metal.
Ponding water
Clogged drains, sagging decks and tapered insulation fixes.
Aging but dry roofs
Restoration coatings that add years of service.
End of life
Tear-off or recover, insulation and new membrane.
What a good repair visit includes
- The membrane type identified and recorded, with the age if known.
- A leak trace or water test that finds the entry point, not just the stain.
- A check of seams, flashings, drains and penetrations across the whole roof, not just the wet spot.
- Moisture testing where insulation may be wet, because patching over wet insulation rarely lasts.
- Photos before and after, and a written description of what was done.
- Materials compatible with your membrane and, where a warranty exists, approved by its manufacturer.



